Publications

Grain sampling methods to achieve consumer confidence and food safety

RESEARCH REVIEW 50

Grain sampling methods to achieve consumer confidence and food safety

by

D ARMITAGE

Central Science Laboratory, DEFRA, Sand Hutton, York YO41 1LZ

July 2003

ABSTRACT

Grain is sampled for one, possibly, two reasons:

  • to determine the average quality based on a representative sample
  • to detect contaminants.

This information may trigger rejection of a load or determine whether the levels of a contaminant in a bulk exceed a regulatory threshold.

This review examined published sampling regimes for a number of contaminants that now, or in the future, may affect food safety. These were: genetically modified organisms, mycotoxins, micro-organisms, heavy metals, agrochemical residues and arthropod pests.

A common, ISO 13690-based approach using 5-11 samples from 15-500t is used for some contaminants. This is reasonable when the contaminant (analyte) is homogeneously distributed, although sample size and number of samples/tonne are often poorly defined, standards used may have no scientific basis and there are rarely validation details. Sampling regimes for insects and in particular, mycotoxins, which are heterogeneously distributed, are very demanding.

An EU directive recommends taking 100 samples of 100g from 50-1500t for regulatory purposes for mycotoxin determination. Live insect contamination is best estimated using traps but the regulatory mycotoxin sampling may be adaptable for sampling insects and would also apply to dead insects.

It is recommended that the ISO-based sampling method be validated experimentally for a variety of analytes since it is widely cited and convenient to use. However, its effectiveness is unclear. A simplified method of sampling for mycotoxins should be developed that will give results comparable to the regulatory sampling. This would demonstrate 'due diligence' and avoid costs associated with the 'regulatory' sampling protocols. (If such a method proved 'substantially equivalent' to the regulatory sampling, it could be used for regulatory processes if there were cost savings). The pattern of mixing grain during outloading has considerable influence on the distribution of analytes. It therefore affects the sampling regime and merits study.

HGCA Project Number: 2912
Price: £4.00

Related Publications

Document download

View a printer friendly version of this publication

Download this publication PDF

RR50.pdf

File size: 241KB
Research_review_thumb